8 800 222-34-56


 Modern and fast-moving design

Berkut L-HT Pro - this boat has a combined functionality, it is suitable for a long voyage on the sea or river, enjoying the magnificent nature and outlandish places, while you can still go fishing and hunting


5.65 m

2.07 m

1.95 м

3/4 mm


465 kg

6 persons

115 HP

100 l

600 kg

The motor boat Berkut L-HT Pro is made of aluminium alloy. The rigidity of the hull is provided by a longitudinal-transverse set. The thickness of the broadside is 3 mm, the bottom - 4 mm. Maximum allowable engine power is 115 HP, but 50 HP engine is enough to get the boat in planing mode. Interspace is filled with polyurethane buoyancy blocks of total volume about 600 litres. It provides positive buoyancy, sound insulation and durability, i.e., when the boat is filled with overboard water, it will remain afloat and will not sink. The sheer line is reinforced with a rubber boat fender. Also, it was decided to provide the boat with greater load capacity. For this purpose, the area and capacity for the cockpit was allocated, a bottom with a high level of rigidity of floorboards was made.




An aluminium half-cabin forms habitable space protected from wind and rain. Together with a boat cover you can stay for multi-day trips without a tent. 

The captain's chair in the cockpit provides a good view over the cabin. There is a small windshield on the roof of the cabin

Due to the outboard motor (stern together with transom are moved backward), noise and vibrations of engine are minimal. But crinolines provide an easy access to the motor.





 The motor boat Berkut L-HT Pro is made in two versions: Standard and Comfort. When choosing a motor boat, carefully study what is included in one or another configuration

Configurations Standart Comfort
Prise 625 000 roubles 700l000lroubles
Hull Welded, foamed Welded, foamed
Door in the bow part Yes Yes
Door closers and furniture Yes Yes
Glazing the cabin tempered glass tempered glass
Plywood floorboards in the cockpit Laminated plywood with rubber edging Laminated plywood with Marideck coating
Hull powder paint RAL 9007 Paint colour by choice
Electrical equipment Fuses, wiring, mass switch Fuses, wiring
Accumulator box with the mass switch Optional Yes
Bow railing Low Low
Echo-sounder sensor mounting area Yes Yes
Steering kit Plastic helm, gearbox, steering rope LUX helm, gearbox, steering rope
Welded tank Aluminium, 100 litres with fuel level sensor, made in USA Aluminium, 100 litres with fuel level sensor, made in USA
Bilge pump Electric, 1500 gallons/hour Electric, 1500 gallons/hour
Large glove box Two in the after body Two in the after body
Small glove box 2 in the cabin 2 in the cabin
Inspection hatch cover in the captain's console Yes Yes
Glove box in the passenger's console Yes Yes
Glove box in the passenger's console without a cover Yes Yes
Additional transom Yes Yes
Aluminium welded ladder Yes Yes
Area for an anchor roller Optional Optional
Stern railing Yes Yes
Lamp in the cabin Yes Yes
Locker in the cabin 5 lockers 5 lockers
Cabin’s interior finish Carpet Carpet
Floorboard finish in the cabin Optional Carpet
Tank filler neck with a breather in the recess Plastic Stainless
Button block 3 keys with a cigarette lighter 4 keys with backlit
Stowage with a cup holder for the captain Yes Yes
Captain’s chair The captain’s swivel chair on the brand rack The captain’s swivel chair with sleds on the brand rack
Passenger’s seat The captain’s chair on the brand rack The captain’s swivel chair on the brand rack
Running lights Red, green, fore light, white stern Diode red, Diode green, fore, white stern light.
Hinges plastic stainless
Cigarette lighter socket In the button block portable
Trench gate in the cabin Plastic Stainless
Trench gates in the cockpit (if equipped with a stern seat) plastic stainless
Equipment of a stern part of cockpit Optional For choice: locker transformer /2 welded lockers + table/stern seat with a lining
Marideck on floorboards in the cockpit Optional Yes
Soft overlays on gunwales in the cockpit Optional Yes
Soft overlays on gunwales in the cabin Optional Optional
Stern tray table Optional Yes, if configuration includes stern steps or lockers
Sound signal Optional Yes
A set of soft linings in the cabin Optional Yes
Plastic cap of bilge pump Yes yes
An insert for ski tow pylon Yes Yes

Video and photo




Hull painting options


онлайн сериал меня зовут эрл смотреть или скачать

О нас

Наша компания Беркут-Марин на рынке работает с 2009 года. У нас вы можете приобрести только самые качественные катера,
приобрести их в Санкт-Петербурге. Купить лодку в спб, купить катер в спб просто и легко, все наши катера и лодки присутствуют
на сайте, в случае чего вы можете приехать к нам и приобрести их.  Наш завод соединяет в себе традиции лучших лодочных
производителей с новейшей технологической и материальной базой, а персонал обладает высокой квалификацией и необходимым опытом.
И, на сегодняшний день, катера можно приобретать по доступным ценам. В городе Санкт-Петербурге, у тех, кто интересуется
малогабаритным водным транспортом, есть прекрасная возможность купить алюминиевый катер или алюминиевые лодки по приемлемой цене.
Наша компания предоставляет возможность купить катер в СПБ.

Яндекс цитирования